A Tragedy with a Happy Ending!

The locomotive pictured on the front of this post card is a Pacific type (2-6-2 wheel arrangement) #1278. This website tells us about the history of the locomotive: https://www.ageofsteamroundhouse.org/canadian-pacific-1278-4-6-2-the-unheralded-hero-of-modern-day-steam/ It was one of thirty, G-5d class engines built for Canadian Pacific Railway (CP) during 1948 at Canadian Locomotive Company in Kingston, Ontario (serial #2435). Their low-weight, 117-ton construction was perfect for light-rail and branch line duty on CP passenger and freight trains. These 4-6-2s had a perfect power-to-weight ratio and were known as “diggers” that dug in and ran as fast as engineers dared. The more you beat them, the hotter they got—800 degrees F steam heat going into the cylinders, so hot that sometimes their shiny piston rods turned blue! The balanced design of the G-5d had the advantage of a perfect ratio of crank position to small-ish, 70-inch driving wheels. That is important because of the increased number of power strokes per mile, compared with locos having larger drivers but less power. This G-5d steamer loved screaming uphill with 17-20 coaches and 1% grades. The #1278 was equipped with all modern devices of the day, including an Elesco 5-poppet front-end throttle, an Elesco feedwater heater and a mechanical stoker. Inside the firebox, new style button-head staybolts were used to affix the steel crown sheet. A big advantage was #1278’s small firebox with no large, expansive sheets, thus reducing thermal stresses because of limited strain due to less expansion and contraction. The G-5d locos had very strong fireboxes, but with generous grate areas and big ash pans. Like all of CP’s G-5d locos, #1278 had a slotted dry pipe and, therefore, needed no steam dome. They were easy to fire, easy to maintain, and strong as an ox! All G-5d Pacifics have all-weather aluminum cabs, but climb onto the engineer’s seat on a hot July day and you will soon learn that the poorly ventilated, hot, enclosed space is better suited to Canada’s cold winter weather. Along with CP 4-6-2 sisters #1246 and #1293, #1278 was purchased (in 1965) by F. Nelson Blount for use at his expanding Steamtown USA museum and Green Mountain tourist train operation in Bellows Falls, Vermont. This website tells us the history of Steamtown USA in Bellows Falls and its move to Pennsylvania. https://www.steamlocomotive.com/places/steamtownUSA/ Before there was Steamtown National Historic Site in Scranton, PA, there was Steamtown U.S.A. in Bellows Falls, VT. Steamtown U.S.A. was owned and operated by Nelson Blount and the Bellows Falls location was not the first. Mr. Blount bought the narrow gauge Edaville Railroad in South Carver, MA in 1955. His first standard gauge locomotive was the Boston & Maine 1455. As he began to collect other standard gauge steam locomotives, it became apparent that he would need a location serviced by standard gauge tracks. So, in 1960 Mr. Blount purchased a Boston & Maine rail yard in North Walpole, NH and moved all of his equipment there. In 1964 Nelson Blount obtained Rutland trackage rights between North Walpole, NH and Westmoreland, NH. Once again, Mr. Blount moved his steam collection from the Boston and Maine rail yard in North Walpole, NH to a new site roughly two miles north in Bellows Falls, VT. This latest location was at the former site of a proposed Rutland yard in Riverside, just north of North Walpole and Bellows Falls, VT. Tracks fanning out from a turntable provided an excellent place to display his collection of steam locomotives. Over the years, excursion trains were run out of four different locations: Sunapee, NH, Keene, NH, North Walpole, NH, and Bellows Valls, VT. Tragedy struck in 1967 when Nelson Blount was killed when his private plane crashed into a tree in Marlborough, NH. Nelson was only 49. This event took a lot of momentum out of Steamtown U.S.A. Most of the operational steam locomotives were either sold or fell into disrepair. Then, in 1970, Vermont passed air quality regulations which prohibited steam operations. Diesel locomotives were then used on Steamtown U.S.A. excursions and ridership fell dramatically. Despite the air quality regulations, the Steamtown Foundation again began operating with a steam locomotive. By 1983, Steamtown U.S.A. again had six operating steam locomotives. Despite the resurrection of steam locomotives, Steamtown U.S.A. was in financial trouble. It was determined that the main problem was its location -- isolated from any major population center. In 1984, Steamtown U.S.A. was moved to Scranton, PA. Still losing money, the Steamtown Foundation went bankrupt in 1986. Congress created the Steamtown National Historic Site and the National Park Service acquired the collection. If it were not for Mr. Nelson Blount amassing the incredible collection of steam locomotives he did, we would not have many of the operating locomotives and museums we do have today.

The post card was published by Forward's Color Productions out of Manchester, Vermont. The picture on the front of the post card was taken by Frank L. Forward, the president of this company. It was started in 1964. The internet search showed that in 2002 the registry was still open, but the company is no longer active.